Skip to content Skip to footer
Get Started

For Individuals

Close

DESCRIPTION

A1 Line Machanic
A category A aircraft maintenance license shall permit the holder to issue certificates of release to service following minor scheduled line maintenance and defect rectification within the limits of tasks specifically endorsed on the authorization.

B2 Engineering
A category B2 aircraft maintenance licence shall permit the holder to issue certificates of release to service following maintenance on avionic and electrical systems.

B1.1 & B1.2 Engineering
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Combined Course
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

PROFESSIONAL LICENSING FOR INDIVIDUALS

Fujairah aviation academy Aviation Maintenance Engineering College is approved and recognized by both the UAE General Civil Aviation (GCAA) and European Aviation Safety Agency (EASA) for the purposes of Aircraft Maintenance Engineer licensing. Fujairah Aviation Academy providing Aircraft Engineering training in the B1.1 Aeroplanes Turbine Engine, B1.2 Aeroplanes Piston Engine, B2 Avionics categories and A categories for Line Mechanic.

Information A category A aircraft maintenance license shall permit the holder to issue certificates of release to service following minor scheduled line maintenance and defect rectification within the limits of tasks specifically endorsed on the authorization.
Commitment 800 hours over 8 months
Language
English
How To Pass Pass all graded assignments to complete the guided project.

The course is scheduled for approximately 8 months divided into Theoretical Lectures
and Practical Training as per UAE General Civil Aviation Authority (GCAA-CAR147)
regulation, preceded by 7 weeks (180hrs) of Technical English Language as prerequisite.
The Aircraft Maintenance Engineering Line Mechanic course scheduled as per the following phases:

Phase 1: It is divided into Theoretical Lectures and Practical Sessions (500hrs) covering
the following modules:

  1. Mathematics
  2. Physics
  3. Electrical Fundamentals
  4. Digital Techniques
  5. Materials and Hardware
  6. Maintenance Practices
  7. Basic Aerodynamics
  8. Human Factors
  9. Aviation Legislation
  10. Aeroplane Aerodynamics Structures and Systems
  11. Gas Turbine Engine
  12. Propellers

Phase 2: On Job Training (OJT)
This phase On Job Training consists of 300hrs training and will be conducted in Fujairah
Aviation Academy Maintenance organization and in any external approved maintenance
organization.

REQUIREMENTS FOR COURSE ENROLLMENT 

  1. Applicants must be at least 17 years of age.
  2. Applicants must must present certificate in IELTS with minimum score of 4.5 or TOEFL
    with minimum score of 60% otherwise he has to pass Fujairah Aviation Academy Basic
    English Exam with minimum
    score of 50%.
  3. Applicant must pass Basic Mathematics and Physics examination at Fujairah Aviation
    Academy exam center with a minimum score of 50% in each subject.

At the end of the course the student will be granted certificate of recognition
approved by UAE General Civil Aviation Authority

COURSE FEES

AED 55,000 (AED Fifty-Five Thousand Only), the Fees are exclusive of UAE-VAT which will be charged additionally.

PAYMENT SCHEDULE

  1. First installment of AED 5,000 payable prior to course start date.
  2. Second installment of AED 5,000 will be paid on second month of the course
  3. The remaining amount (AED 45,000 will be paid in six equal installment of AED 7,500 in the succeeding months (6X AED7,500).

COURSE FEES INCLUDES:

  1. All Books and Training Materials.
  2. All Theoretical Lessons & Practical Lessons (500hrs).
  3. The On Job Training period (300hrs).
  4. Academy uniforms.
  5. GCAA exam fees (one attempt for each module, 12 Multiple Choice and 3 essay exams)

ADDITIONAL COSTS

  1. Enrollment Fees AED 500.
  2. Visa Fees – Per Year (If Required)
    • a. AED 3,000 Outside Country
    • AED 3,500 Inside Country
  3. Extra Theoretical Lessons/ Practical Lessons Fees AED 50 per hour.
  4. GCAA exam fees for any failed module.
  5. License Application.

Notes:

  1. The costs stated above are minimum rates and it may vary depending upon each individual’s capability of learning..
  2. The duration of the course also depends upon the attendance of the student.
  3. All Payments are Non Refundable.
Information A category B1 aircraft maintenance licence shall permit the holder to issue certificates of release to service following maintenance, including aircraft structure, powerplant and mechanical and electrical systems. Replace ment of avionic line replaceable units, requiring simple tests to prove their serviceability, shall also be included in the privileges. Category B1 shall automatically include the appropriate A subcategory.
Commitment 2600 hours over 24 months
Language
English
How To Pass Pass all graded assignments to complete the guided project.

The combined course is scheduled for approximately 24 months divided into Theoretical
Lectures and Practical Training as per UAE General Civil Aviation (GCAA-CAR147) and
European Aviation
Safety Agency (EASA- PART147) preceded by 7 weeks (180hrs) of Technical English
Language as a prerequisite. The Aircraft Maintenance Engineering B1.1 Aeroplanes
Turbine Engine, B1.2 Aeroplanes
Piston Engine course scheduled as per the following phases:
Phase 1:It is divided into Theoretical Lectures and Practical Sessions (2200hrs) covering
the following modules:

  1. Mathematics
  2. Physics
  3. Electrical Fundamentals
  4. Electronic Fundamentals
  5. Digital Techniques
  6. Materials and Hardware
  7. Maintenance Practices
  8. Basic Aerodynamics
  9. Human Factors
  10. Aviation Legislation
  11. Aeroplane Aerodynamics Structures and Systems
  12. Gas Turbine Engine
  13. Piston Engine
  14. Propellers

Phase 2: On Job Training:
This phase On Job Training consists of 400hrs training and will be conducted in Fujairah
Aviation Academy Maintenance organization and in any external approved maintenance
organization.
At the end of the course the student will be granted two certificates of recognition
approved by UAE General Civil Aviation Authority and European Aviation Safety
Agency.

REQUIREMENTS FOR COURSE ENROLLMENT 

  1. Applicants must be at least 17 years of age.
  2. Applicants must must present certificate in IELTS with minimum score of 4.5 or TOEFL
    with minimum score of 60% otherwise he has to pass Fujairah Aviation Academy Basic
    English Exam with minimum score of 50%.
  3. Applicant must pass Basic Mathematics and Physics examination at Fujairah Aviation
  4. Academy exam center with a minimum score of 50% in each subject.

COURSE FEES

130,000 (AED One Hundred Thirty Thousand Only); the Fees are exclusive of UAE-
VAT which will be charged additionally.

PAYMENT SCHEDULE

  1. First installment of AED 5,000 payable prior to course start date.
  2. Second installment of AED 5,000 will be paid on second month of the course.
  3. The remaining amount (AED 120,000 will be paid in twenty equal installments of AED 6,000 in the succeeding months (20XAED 6,000).

COURSE FEES INCLUDES:

  1. All Books and Training Materials
  2. All Theoretical Lessons & Practical Lessons (2200hrs)
  3. The On Job Training (OJT) (400hrs)
  4. Academy uniforms.
  5. GCAA and EASA exam fees (one attempt for each module, 14 Multiple Choice and 3 essay exams)

ADDITIONAL COSTS

  1. Enrollment Fees AED 500.

  2.  Visa Fees – Per Year (If Required)

    • AED 3,000 Outside Country
    • AED 3,500 Inside Country

  3.  Extra Theoretical Lessons/ Practical Lessons Fees AED 50 per hour.

  4. GCAA exam fees for any failed module.

  5. License Application.

Notes:

  1. The costs stated above are minimum rates and it may vary depending upon each individual’s capability of learning.
  2. The duration of the course also depends upon the attendance of the student.
  3. All Payments are Non Refundable.
Information A category B2 aircraft maintenance licence shall permit the holder to issue certificates of release to service following maintenance on avionic and electrical systems.
Commitment 2400 hours over 22 months
Language
English
How To Pass Pass all graded assignments to complete the guided project.

The Avionics course is scheduled for approximately 22 months divided into Theoretical
Lectures and Practical Training as per UAE General Civil Aviation (GCAA-CAR147) and
European Aviation Safety 
Agency (EASA- PART147) preceded by 7 weeks (180hrs) of Technical English
Language as a prerequisite. The Aircraft Maintenance Engineering Avionics course
scheduled as per the following phases:

Phase 1: It is divided into Theoretical Lectures and Practical Sessions (2000hrs) covering the following modules:

  1. Mathematics

  2. Physics

  3. Electrical Fundamentals

  4. Electronic Fundamentals

  5. Digital Techniques

  6. Materials and Hardware

  7. Maintenance Practices

  8. Basic Aerodynamics

  9. Human Factors

  10. Aviation Legislation

  11. Aeroplane Aerodynamics Structures and Systems

  12. Propulsion

Phase 2: On Job Training (OJT)
This phase On Job Training consists of 400hrs training and will be conducted in Fujairah
Aviation Academy Maintenance organization and in any external approved maintenance
organization.

At the end of the course the student will be granted two certificates of recognition
approved by UAE General Civil Aviation Authority and European Aviation Safety
Agency.

REQUIREMENTS FOR COURSE ENROLLMENT 

  1. Applicants must be at least 17 years of age.
  2. Applicants must must present certificate in IELTS with minimum score of 4.5 or TOEFL
    with minimum score of 60% otherwise he has to pass Fujairah Aviation Academy Basic
    English Exam with minimum score of 50%.
  3. Applicant must pass Basic Mathematics and Physics examination at Fujairah Aviation Academy exam center with a minimum score of 50% in each subject.

COURSE FEES

130,000 (AED One Hundred Thirty Thousand Only); the Fees are exclusive of UAE-
VAT which will be charged additionally.

PAYMENT SCHEDULE

  1. First installment of AED 5,000 payable prior to course start date.
  2. Second installment of AED 5,000 will be paid on second month of the course.
  3. The remaining amount (AED 120,000 will be paid in twenty equal installments of AED 6,000 in the succeeding months (20XAED 6,000).

COURSE FEES INCLUDES:

  1. All Books and Training Materials.
  2. All Theoretical Lessons & Practical Lessons (2000hrs).
  3. The On Job Training (OTJ) (400hrs).
  4. Academy uniforms.
  5. GCAA and EASA exam fees (one attempt for each module, 14 Multiple Choice and 3 essay exams)

ADDITIONAL COSTS

  1. Enrollment Fees AED 500.
  2. Visa Fees – Per Year (If Required)
    • AED 3,000 Outside Country
    • AED 3,500 Inside Country
  3. Extra Theoretical Lessons/ Practical Lessons Fees AED 50 per hour.
  4. GCAA exam fees for any failed module.
  5. License Application.

Notes:

  1. The costs stated above are minimum rates and it may vary depending upon each individual’s capability of learning..
  2. The duration of the course also depends upon the attendance of the student.
  3. All Payments are Non Refundable.
Information This combined course gives the chance for the student to get training on three categories: B1.1, B1.2 and B2 which will enable him to get the license for any or all of them once his experience has been done.

A category B1
A category B1 aircraft maintenance licence shall permit the holder to issue certificates of release to service following maintenance, including aircraft structure, powerplant and mechanical and electrical systems. Replace ment of avionic line replaceable units, requiring simple tests to prove their serviceability, shall also be included in the privileges. Category B1 shall automatically include the appropriate A subcategory.

A category B2
A category B2 aircraft maintenance licence shall permit the holder to issue certificates of release to service following maintenance on avionic and electrical systems.
Commitment 3094 hours over 30 months
Language
English
How To Pass Pass all graded assignments to complete the guided project.

The combined course is scheduled for approximately 30 months divided into Theoretical
Lectures and Practical Training as per UAE General Civil Aviation (GCAA-CAR147) and

European Aviation Safety Agency (EASA- PART147) preceded by Technical English
Language as a prerequisite.
The course is scheduled as per the following phases:

Phase 1: It is divided into Theoretical Lectures and Practical Sessions (2694hrs) covering
the following modules:

  1. .Mathematics
  2. Physics
  3. Electrical Fundamentals
  4. Electronic Fundamentals
  5. Digital Techniques
  6. Materials and Hardware
  7. Maintenance Practices
  8. Basic Aerodynamics
  9. Human Factors
  10. Aviation Legislation
  11. Aeroplane Structures and Systems
  12. Aeroplane Structure and Systems
  13. Gas Turbine Engine
  14. Piston Engine
  15. Propellers

Phase 2: On Job Training 
This phase On Job Training consists of 400hrs training and will be conducted in Fujairah
Aviation Academy Maintenance organization and in any external approved maintenance
organization.

At the end of the course the student will be granted two certificates of recognition
approved by (GCAA) UAE General Civil Aviation Authority and (EASA) European
Aviation Safety Agency.

REQUIREMENTS FOR COURSE ENROLLMENT 

  1. Applicants must be at least 17 years of age.
  2. Applicants must must present certificate in IELTS with minimum score of 4.5 or TOEFL
    with minimum score of 60% otherwise he has to pass Fujairah Aviation Academy Basic English Exam with minimum score of 50%.
  3. Applicant must pass Basic Mathematics and Physics examination at Fujairah Aviation Academy exam center with a minimum score of 50% in each subject.

COURSE FEES

160,000 +UAE VAT (AED One Hundred Sixty Thousand Only + UAE VAT)

PAYMENT SCHEDULE

  1. First installment of AED 8,000 +UAE VAT payable prior to course start date.
  2. Second installment of AED 8,000+ UAE VAT will be paid on second month of the course.
  3. The remaining amount (AED 144,000 + UAE VAT will be paid in twenty four equal
    installments of AED 6,000 +UAE VAT in the succeeding months (24XAED 6,000 +UAE VAT).

COURSE FEES INCLUDES:

  1. All Books and Training Materials.
  2. All Theoretical Lessons & Practical Lessons (2694hrs).
  3. The On Job Training (OJT) (400hrs).
  4. Academy uniforms.
  5. GCAA and EASA exam fees (one attempt for each module, 15 Multiple Choice and 3 essay exams)

ADDITIONAL COSTS

  1. Enrollment Fees AED 500+UAE VAT.
  2. Visa Fees – Per Year (If Required)
    • AED 3,000+ UAE VAT Outside Country
    • AED 3,500+ UAE VAT Inside Country
  3. Extra Theoretical Lessons/ Practical Lessons Fees AED 50+ UAE VAT per hour.
  4. GCAA exam fees for any failed module.
  5. License Application

Notes:

  1. The costs stated above are minimum rates and it may vary depending upon each individual’s capability of learning..
  2. The duration of the course also depends upon the attendance of the student.
  3. All Payments are Non Refundable.

CAR66/Part-66 Examination

Aero Learn Academy is an approved organization to conduct basic examinations as per GCAA and EASA CAR/PART 66 in the premises of the academy which is based in Fujairah as well as in Dubai. The details for all approved categories are as follow:

Part-66 Examination

Basic Examinations

  • B1.1 Turbine Engine Aeroplane
  • B1.2 Piston Engine Aeroplane
  • B2 Avionics

Additional Examinations

  • KCAA Part 66 B1/B2 (Practical assessments)
  • KCAA Part 66 B1/B2 (Basic knowledge examination)
  • EASA Part 66 B1/B2 (Basic knowledge examination)
  • EASA/KCAA Part 66 (Consolidation class)

Engineering Technology

  • Basic Gas Turbine
  • Basic Aircraft Instrument 1
  • Basic Aircraft Instrument 2

FAQs

Our program is structured to offer dual qualifications, providing comprehensive training for both CAT B1 and B2 categories. However, students may choose to specialize in one category based on their interests and career goals.

CAT B1/B2 certified engineers are in high demand in airlines, MRO facilities, and aviation manufacturing. They are qualified for various roles, including maintenance, repair, and quality assurance positions.

Yes, we provide guidance and support throughout the licensing process to ensure our graduates meet all requirements for the EASA Part-66 certification.

×